Citrix Workspace 2001
Important Disclaimer - Limited Release Hotfix
If the Download link is not available on this page and you wish to obtain this limited distribution release, visit our support site at http://www.citrix.com/support and open a support case using your Citrix account credentials, or contact your reseller at http://www.citrix.com/partners/locator.
Testing of this release was targeted only at the affected functionality, and regression and stress testing were minimal. Introduce this release to a test environment for evaluation before deploying it to a production environment.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, CITRIX AND ITS SUPPLIERS MAKE AND YOU RECEIVE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, AND CITRIX AND ITS SUPPLIERS SPECIFICALLY DISCLAIM WITH RESPECT TO THE HOTFIX ANY CONDITIONS OF QUALITY, AVAILABILITY, RELIABILITY, SECURITY, LACK OF VIRUSES, BUGS OR ERRORS, OR SUPPORT AND ANY IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER CITRIX, NOR ITS SUPPLIERS SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL, MULTIPLE, PUNITIVE OR OTHER DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF DATA, LOSS OF INCOME, LOSS OF OPPORTUNITY, LOST PROFITS, COSTS OF RECOVERY OR ANY OTHER DAMAGES), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, AND WHETHER OR NOT FOR BREACH OF CONTRACT, NEGLIGENCE OR OTHERWISE, AND WHETHER OR NOT CITRIX, ITS SUPPLIERS, OR LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Important Notes about This Release
Caution! This release may require you to edit the registry. Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Citrix cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.
Where to Find Documentation
This document describes the issue(s) resolved by this release and includes installation instructions. For additional product information, including system requirements, see Profile Management 7.15 on the Citrix Product Documentation site.
New Fixes in This Release
7.15 LTSR CU2 sessions might launch as a black screen. The issue occurs with sessions running on XenApp and XenDesktop 7.15 LTSR CU2 and 7.17 VDAs when Profile Management is enabled. For more information and a workaround, see Knowledge Center article CTX235100.
[From ProfileMgmt_7_15_2001][#LC9648]
Fixes from Replaced Hotfixes
No hotfixes were replaced by this release.
Installing and Uninstalling this Release
Notes:
- This release is packaged as a .zip file containing the replacement profilemgt.msi file. For more information about deploying msi files, see Microsoft article 884016 or visit the Microsoft Web site and search on keyword msiexec.
- Caution: Downgrades, also known as rollbacks, from this upgrade are not supported and might leave your systems in an unstable state. This upgrade does not patch the existing installation - it fully replaces it with a new installation. As a result, uninstalling this package removes the entire component from the computer. If the need arises to revert to an earlier version of the product, you must uninstall this package and then reinstall the earlier version of the product. Reverting to an earlier version of the product might result in the loss of settings you configure while this upgrade is installed.
- If the need arises to restore the original settings and functionality provided by this hotfix, you must uninstall the hotfix before reinstalling it according to the installation instructions below.
- To install this package successfully, servers must not have registry modification restrictions in place.
- This hotfix might or might not prompt you to restart the server when the installation or uninstallation is complete. You must restart the server for the installation to complete.
To install this hotfix:
- Copy the file to a shared folder on the network.
- Extract the compressed file and save the profilemgt.msi file on the computer you want to update.
- Run the .msi file.
- Restart the computer.
To uninstall this hotfix:
- From the Start menu, select Settings > Control Panel.
- In Control Panel, double-click Programs and Features.
- Highlight the hotfix you want to remove and click Uninstall.
- Follow the directions on-screen.
A typical Citrix environment can be so complex. What might seem like a simple problem in the Citrix Receiver can turn out to be very hard to troubleshoot. For instance, if a user’s Citrix Receiver is not launching applications, you need to consider a number of factors.
A lot of the solutions involve editing the Windows Registry—a high-risk operation that, if done wrong, can have serious consequences.
Citrix Receiver not Launching Applications: Misconfigured LogoffCheckSysModules registry value in HKLM
When published applications don’t launch and the user doesn’t see any error message, then admins don’t see any entry that stands out in the Event Log of your Citrix server. One of the places you’ll want to check is the value of LogoffCheckSysModules. This is found in the registry subkey:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlCitrixwfshellTWI
The value of this registry key SHOULD NOT contain the executable for the application the user is attempting to launch. If the name of the executable in question is there, create a backup of the registry key and then remove the executable’s name from the key.
Application launch attempts in a published desktop get disconnected
When you attempt to launch a published application from a published desktop, that action may disconnect the session of the published desktop. That’s because Citrix receiver is configured by default to reconnect all open sessions upon launch.
To make the application launch succeed, you need to change the value of the WSCReconnectMode key from 3 to 0 in one of the following:
- 64-bit system: HKEY_LOCAL_MACHINESOFTWAREWow6432NodeCitrixDazzle
- 32-bit system: HKEY_CURRENT_USERSOFTWARECitrixDazzle
Application not given enough time to launch
Some launch-related issues occur because certain applications need more time to launch. There are two registry key values you can change that might remedy the problem. Both are in the registry key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlCitrixwfshellTWI
The first is LogoffCheckerStartupDelayInSeconds. Try setting this initially to 10 seconds and then increase by 10 seconds until 600 seconds.
The second one is ApplicationLaunchWaitTimeoutMS. Try setting this initially to 10,000 milliseconds and then increase up to 30,000.
Notice that, for these two registry key values alone, much time can be spent trying out different values. And these are just some of the many possible causes why Citrix Receiver is not launching applications.
Citrix Receiver not Launching in Windows 10
Citrix Receiver for Windows 10 has a list of arguably smart features, however there are several issues that constantly pop-up and prevent Citrix Receiver from launching in Windows 10. For instance, launching Citrix with the regular domain user account fails to launch the desktops and applications. If your Citrix Receiver is not launching in Windows 10, mentioned below are the steps you can undertake to fix these errors.
1. Refresh Citrix Receiver applications.
Click on the drop-down next to your name in the upper-right corner of the menu, and click Refresh Apps.
2. Allocate full permissions to the user count being used.
Assign full permissions for the user account under HKEY_USERUSER_SIDSOFTWARECitrix on the client machine.
Citrix Workspace 2001 Mac
3. Download the latest available version to prevent compatibility issues.
Navigate to the Citrix Receiver icon >> Advanced Preferences >> About to check the version. Compare it with the latest available version and download a new one if it does not match.
4. Reset the Citrix Receiver if everything else fails. This might cause accounts, apps, and cached files to be removed.
Navigate to Receiver icon >> Advanced Preferences >> Reset Receiver. A prompt appears, asking if you want to reset the receiver. Click Yes, Reset Receiver and type the URL remote.ptlgateway.net in the popup box that appears next. Enter your credentials again.
Applications not launching on Apple Safari 12
Apple has removed the support for NPAPI, hence Citrix applications now fail to launch in Apple Safari 12. This problem can be solved by carrying out some changes in the server side or the client side. You can modify the web config under the Receiver for Web (RfWeb) site in the server. The client-side change includes enabling the Develop tab at the Safari menu, using which the Safari cache and all Safari Windows are closed prior to starting Safari to browse the Storefront’s receiver.
Avoid Citrix receiver not launching applications issues for good with Parallels RAS
To avoid Citrix Receiver application launch issues for good, shift to Parallels® Remote Application Server (RAS). Parallels RAS is a virtual application and desktop delivery solution with a much simpler architecture. Complex issues like those mentioned above are eliminated from the client-side and can usually be addressed by simply reinstalling or restarting the Parallels Client. In addition, users can also switch to the HTML5 Client until any issue is resolved.
Log Into Citrix Workspace
Don’t just take our word for it—try it out yourself. Download your 30-day Parallels RAS trial now and say goodbye to all your application launch issues.
References
Geekworldinc | http://geekworldinc.blogspot.com/2014/02/
Lowell Vanderpool [YouTube video]| https://youtu.be/_U78iAem3uo
Carl Stalhood | https://www.carlstalhood.com/virtual-delivery-agent-vda-7-15-ltsr/
Citrix Workspace 2013
Work Anywhere | http://www.waw.raidghost.com/index.php/news-it-waw/blogueurs-follow/1363-virtual-delivery-agent-vda-712
Citrix Workspace 2001
Poppelgaard | https://www.poppelgaard.com/author/admin/page/110